Hibernating time is over Dear All, The gyro site has gone very quiet and although it has been a bad year, with so many good people dying, you inquisitive lot cannot all have pegged it at once – can you? It’s spring ... Asked on 26 April 2016 by Nitro Read Question in Full      View Answers (1 answers)

Linear Gyroscope Effect Last month I was experimenting with a mass, making a reciprocating movement in a short tube. The mass was in a state of resonance. I discovered a gyroscopic effect of the tube. It was forming a gravit ... Asked on 17 April 2016 by BertoA Read Question in Full      View Answers (1 answers)

Torpedo Gyroscopes I'm looking for anyone with a working knowledge of WWII MK 12-1 Torpedo Gyroscopes # 52202 and 52430. I picked these up on eBay as a future birthday gift and am interested in cleaning and polishing th ... Asked on 3 April 2016 by jkbakamd Read Question in Full      No answers as yet.

Gyroscope question Hey guys, I'm new to gyroscopes and don't fully understand how they work so I'm hoping someone could shed some light on some questions I have. I'm working on a project for school where my team decided ... Asked on 29 March 2016 by Victor Read Question in Full      View Answers (2 answers)

test post Test post by Glenn testing, testing, 1-2-3 Asked on 20 March 2016 by Glenn Turner Read Question in Full      View Answers (1 answers)

TURNER, KIDD, EVERYONE Dear Glenn Tuner, I know all we regulars hope the best for your father. It crosses my mind every time I click on. We humans suffer a lot. Blessings to you and your family. I will call you soon ... Asked on 18 March 2016 by Glenn Hawkins Read Question in Full      No answers as yet.

north seeking gyro How is a Gyroscope made north seeking? Asked on 14 March 2016 by Triston Read Question in Full      View Answers (3 answers)

Propulsion-- In 2004 I completed a model of what would be referred to as an "offset spin intertial thruster". It does have a directional force action similar to one Mr. Laithewaite demonstrated quite some time ... Asked on 28 January 2016 by Carl A. Helsing Read Question in Full      No answers as yet.

navigation explain that approximate standard compaa error can be obtained by comparison with gyro comparison if no other means available Asked on 20 October 2015 by KRISTINE Read Question in Full      No answers as yet.

What is the significance of gyroscope? I am fascinated by this physical phenomenon and is writing a paper studying its mechanism. I think it would spark the interest of the academic if I can provide other information beyond the physical ex ... Asked on 4 October 2015 by James W. Read Question in Full      View Answers (1 answers)

Up-righting a gyro If a gyroscope is spinning at a tilted angle and it's spin speed slows down, the gyro will start to fall. Does that mean, if the speed of the spinning, tilted, gyro is increased it will upright itse ... Asked on 30 September 2015 by Boopsey Read Question in Full      View Answers (1 answers)

dynamics of machinery differentiate between natural andforced precission Asked on 9 August 2015 by vamsi Read Question in Full      View Answers (1 answers)

getting permission to use material in a paper Hello Glenn, I'd like to get permission to use some of your material in a paper I'm writing. How can I do this please, and what are the rules? Thank you Tony Singarayar Asked on 12 July 2015 by tony singarayar Read Question in Full      View Answers (1 answers)

basic I am building a walking beast,it has 4 legs and walks.at a given time 2 legs come of the ground to go forward and down,therefore while 2 legs are on the ground for 5 seconds it could fall over.and I w ... Asked on 3 June 2015 by lyn Read Question in Full      View Answers (1 answers)

Gyroscopes in cars Has there ever been in a car that a gyroscope was use to stabilize on curves? Hey let's see Asked on 17 May 2015 by T.W. Read Question in Full      View Answers (1 answers)

Gyro I have a gyro as well that was given to me as a gift. The ID number on mine is; MKXII GYRO 276. Does anyone have one of these? This one still has remnants of old lubricant on it from when it was in us ... Asked on 6 May 2015 by dawnell vaughn Read Question in Full      View Answers (1 answers)

gyro stabilizer for motorcycles Good Day, I am inquiring as to where gyroscopic stabilizers for motorcycles can be purchased? Thanks, Mike G. Asked on 26 April 2015 by michael golden Read Question in Full      View Answers (1 answers)

basics to make it work What are the basic steps or instructions to make it work/spin? Asked on 21 April 2015 by LIBBY HEWETT Read Question in Full      View Answers (1 answers)

ring laser gyro what is ring laser gyro? and in what occations does it use? Asked on 26 March 2015 by malinga Read Question in Full      View Answers (1 answers)

PROOF BY REASON THIS TREATMENT IS TO PROVE The dreamers understanding; verses block-headed arguments. First, impact force does not mean momentum continues in the horizontal plane after the downward force is nu ... Asked on 15 March 2015 by Glenn Hawkins Read Question in Full      No answers as yet.

why it is used? Why gyroscope is used ? Asked on 27 February 2015 by Pawar Rahul Read Question in Full      View Answers (1 answers)

Can anyone identify this gyroscope Hi, I got an old gyroscope from army. It came with an wooden box as the gyroscope was attached to it. I'm not sure how old this is, I really don't understand much of these but I would love to. In ... Asked on 24 February 2015 by JP Read Question in Full      View Answers (4 answers)

Where does the energy go? Where does the energy go? Imagine a heavy train, running along at 100 kph. A small electric car accelerates from rest to catch up with the train, taking 10 units of energy from the battery. The c ... Asked on 21 January 2015 by Momentus Read Question in Full      View Answers (1 answers)

Northern v Southern hemisphere Does a spinning wheel precess the opposite way on opposite sides of the equator Asked on 3 January 2015 by Graham Tapper Read Question in Full      View Answers (1 answers)

Comparing the output from two gyros Hi there guys, Just a hobbyist working with MEMS gyros and had this question. Say I had a gyro attached to two different devices. (i.e. One gyro per device), with each gyro outputting a yaw, roll an ... Asked on 2 January 2015 by Antoine Read Question in Full      No answers as yet.

Check out my gyroscopic propelled wheel Link to my gyroscope propelled wheel at LMR website. http://letsmakerobots.com/content/gyroscope-flywheel-propelled-wheel Asked on 9 December 2014 by Jim Demello Read Question in Full      No answers as yet.

compressed air directed and or funneled after 359 367 repulsive magnetic drive 359 against 367 one inner one outer 360 degrees,chains there is not Pull expressed by division..division created by pounds per square inch air pushed out to create lift. In not just itself but the ... Asked on 20 November 2014 by Patrick Hill Read Question in Full      No answers as yet.

String I bought a gyroscope at a yard sale but it didn't have the string. What type of string can I use if I can't find gyroscope replacement string? Hope to hear from someone soon. Thanks, Teresa Asked on 16 November 2014 by Teresa Read Question in Full      View Answers (1 answers)

Royal Navy Torpedo Gyroscope - need more info I have what I believe is a Royal Navy Torpedo Gyroscope and want to know more about it. Can you help? Some info on the markings follow. Many thanks for any insight you can provide. ... Asked on 23 October 2014 by Mike Ward Read Question in Full      View Answers (1 answers)

Sizing a gyroscope I'd like to know the approximate size/mass/speed requirements for a gyroscope that would keep a 200-pound person seated on a bicycle vertical, and if possible, simple calculations for approximating si ... Asked on 22 October 2014 by Dan Wafford Read Question in Full      No answers as yet.

torpedo gyro creep In an old paper on WWII torpedo gyros I found a formula for the lateral placement error due to gyro creep as 3.63-5 R sin(lat) * t where R is run distance (v*t, single speed). This is 1/2 of a standar ... Asked on 30 September 2014 by david cwalina Read Question in Full      No answers as yet.

stuff There has been some talk of a perfect gyroscope. Science has now made that possible with the material explained below; and with the use of Faraday's homopopular motor, in which only the rim would have ... Asked on 23 September 2014 by Glenn Hawkins Read Question in Full      No answers as yet.

Same on blog last posted Hello there, Im also interested in building a Aerotrim , and Im basiccally have the access to a welding machine and metal (I hope enough), and a place to do so. The quest for information on that is ... Asked on 16 September 2014 by Calatica Read Question in Full      No answers as yet.

What is the angle that a gyroscope spins at. What is the angle that a gyroscope spins at. My guess would be something like 51.877 Degrees or 51.52 Degrees. Does anyone know what this angle is. Thanks. GD Y-Y Asked on 11 September 2014 by Golden Dragon Yin-Yang Read Question in Full      View Answers (1 answers)

NASA verifies propulsion generated by EmDrive http://www.wired.co.uk/news/archive/2014-07/31/nasa-validates-impossible-space-drive Reddit comments: http://www.reddit.com/r/science/comments/2c8fzq/nasa_validates_impossible_space_drive_when_a_ ... Asked on 31 July 2014 by MD Read Question in Full      No answers as yet.

What is the total resultant change (all forces) when a push is applied to the axis of a gyro What is the total resultant change (all forces) when a push is applied to the axis of a gyro or spinning wheel. If you push on a gyro axis, there is an opposite push onto the earth at your feet. ... Asked on 14 July 2014 by John Smith Read Question in Full      No answers as yet.

My Chubby Checker experiment (Do the twist) What happens when two gyros are set to the opposite tips of a shaft and while spinning in unison, one is let to fall into gravity; while the other caused to rotate in line with the shaft as in a gimba ... Asked on 30 May 2014 by Glenn Hawkins Read Question in Full      No answers as yet.

robot balance Hi, I need to know if my robot ( which is balancing on one wheel) can use a gyroscope that is just one flywheel to balance forward and back and side to side. I also need to know what weight/speed I ne ... Asked on 29 April 2014 by Jack Didesch Read Question in Full      No answers as yet.

Very motivated buyer Looking to purchase Gyroscope/Orbitron for recreational use. Must have adult capacity. Please contact me if you have any info. For consideration please include manufacturer details with model and year ... Asked on 16 April 2014 by T Flores Read Question in Full      View Answers (1 answers)

Tilting a gyroscope Whats the easiest way to determine the force and speed to tilt a 26' diameter rotor that weighs 75 lbs with a shaft of 8" to the pivot? For the sake of discussion assume it is a round bar and not ... Asked on 15 April 2014 by chuck burgoon Read Question in Full      View Answers (1 answers)

What is earth gyro of aircraft ? Interpretation & presentation of earth gyro. 01.What is earth gyro? Pl. give the interpretation and presentation of aircraft earth gyro. 02. Purpose & function of heading indicator. 03. Presentation of heading indicator. 04.What is aircraf ... Asked on 15 April 2014 by Rabiul Karim Read Question in Full      No answers as yet.

gyro stabilizer for narrow rowboats I want a narrow boat to row that will need to be stabilized due to my bad balance. I'm thinking a gyroscope. Any ideas out there? Electric battery power or power by the rowing mechanism will be ok wit ... Asked on 11 April 2014 by buzz Read Question in Full      No answers as yet.

Contact Anyone have Glen Turner's email address? Asked on 10 April 2014 by Ted Pittman Read Question in Full      View Answers (1 answers)

I need a Gyroscope I am in need of a kind of gyroscope machine to be used in an upcoming marching band show. We are going to put a marching snare drummer in a harnessed seat and rotate him upside down while he is playin ... Asked on 1 April 2014 by Josh Allen Read Question in Full      No answers as yet.

I need a gyroscope!! I am in need of a kind of gyroscope machine to be used in an upcoming marching band show. We are going to put a marching snare drummer in a harnessed seat and rotate him upside down while he is playin ... Asked on 1 April 2014 by Josh Allen Read Question in Full      No answers as yet.

Old gyroscope Where can I send pictures of my old gyroscope so I can find some history on it and if it worth anything? Thanks for your time, kay Asked on 25 March 2014 by Kay Larson Read Question in Full      View Answers (1 answers)

gyro Propulsion in 0 g and full g I am designing & building a propulsion device that utilizes gyroscopic propulsion, but when I look for the research done by others on the subject my browser is flooded with UFO metaphysical out of bod ... Asked on 19 March 2014 by Smalley M.D. Read Question in Full      View Answers (3 answers)

Explanation of how gyroscope works Can you actually explain how a gyroscope works, because the explanation given on the website doesn't make any sense. Also the diagram is very unclear & has poor sense of perspective so that the descri ... Asked on 18 March 2014 by Howard Crawford Read Question in Full      No answers as yet.

Explanation of how gyroscope works Can you actually explain how a gyroscope works, because the explanation given on the website doesn't make any sense. Also the diagram is very unclear & has poor sense of perspective so that the descri ... Asked on 18 March 2014 by Howard Crawford Read Question in Full      No answers as yet.

at last some answers i found this web page, that after so many years put some light to the gyroscopr behavior http://www.enterprisemission.com/Von_Braun2.htm Asked on 16 March 2014 by George Bouras Read Question in Full      No answers as yet.

<< Prev

Page 3 of 17 ( 837 Questions found) Sorting by: Most recent QuestionsMost recent AnswersQuestions with most repliesQuestions with no replies Go to Page: [1][2][3][4][5][6][7]...

Next >>